skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Summary of components of door lock > < Summary of components of outer door handle

Octavia Mk1

Remove and install outer door handle
Remove and install outer door handle
Special tools and workshop equipment required
t  Square wrench or TORX 20
t  Assembly device -T10118-
Removing
   
–  Pull door handle -3- up to the stop in the direction of operation -arrow -A- and hold it.
–  Remove cap -1-.
–  Turn the screw -4- in the given direction -arrow B- until resistance can be felt.
  Note
If the door handle inner part is removed the screw -4- must not be turned.
–  Pull out cover -2--arrow C-.
  S58-0022
–  Unclip the control cable -1- from the door handle -2-.
–  Slide the door handle -2- backwards -arrow A- and swivel it out of the door -arrow B-.
Install
–  Swivel door handle into the door.
For vehicles 05.98 ►
  S57-0047
–  Hang assembly device -T10118- in the spring fixed to the door lock -arrow A- and hang the spring in the lock lever -arrow B-.
For all vehicles
Further installation occurs in reverse order.
  Note
The control cable must lock securely in the door handle outside.
  S57-0134

Summary of components of door lock > < Summary of components of outer door handle