skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
The electrically operated seat with memory > < Assembling seat rack and backrest rack

Octavia Mk1

Removing and installing seat height adjusting elements
Removing and installing seat height adjusting elements
Remove seat from vehicle
Removing:
–  Remove seat height adjustment handle → Chapter.
–  Remove the side plastic covers from the seat.
   
–  Carefully unhook the tensioning springs -2-.
–  Release screws -arrows- and pull seat height adjusting elements -1- out of the seat rack.
Installing:
Installation is carried out in the reverse order.
  Note
Tighten screws -arrows- to 10 Nm.
Seat installed in the vehicle
Removing:
–  Put seat in top position.
–  Remove seat height adjustment handle → Chapter.
–  Remove the side plastic covers from the seat → Chapter.
  S72-0034
–  Release screws -arrows A- and pull out seat height adjusting elements -1-.
Installing:
–  Press down the seat -arrow B-.
–  Position seat height adjusting elements.
–  Tighten seat height adjusting elements -1- with screws -arrows A- (Ma = 10 Nm).
–  Position side plastic covers on the seat → Chapter.
  S72-0035

The electrically operated seat with memory > < Assembling seat rack and backrest rack