skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Assembly overview of covers and upholstery for rear backrests (separated by the headrest and the middle three-point seat belt) > < Assembly overview of covers and upholstery for rear backrests (with armrest, separated)

Octavia Mk1

Removing and installing covers and upholstery for rear backrests (with armrest, separated)
Removing and installing covers and upholstery for rear backrests (with armrest, separated)
Removing:
–  Remove right backrest part out of the vehicle → Chapter.
–  Tilt over the armrest.
   
–  Remove the cover for the armrest -1- and align the safety hook -2- with a screwdriver with a nut or with small pliers.
–  Take the armrest out of the hangers.
t  A great force must be applied when removing the backrest.
  S74-0040
–  Take out the backrest cover -arrow- with pulling force in direction of the backrest.
  S74-0041
–  Lever off pins -1- with a screwdriver.
  S74-0042
–  Remove the safety tension rod -1- out of the hooks -3- with small pliers or a screwdriver.
–  Remove safety tension rod -1- to the top.
–  Remove securing guide -2-.
–  Remove headrest guide → Item.
t  The cover is fastened to the rear panel with the aid of the clamping section.
  S74-0043
–  Remove screws -3- and hold-down device -1- from the rear backrest -2-.
Installing:
Installation is carried out in the reverse order.
  S74-0044

Assembly overview of covers and upholstery for rear backrests (separated by the headrest and the middle three-point seat belt) > < Assembly overview of covers and upholstery for rear backrests (with armrest, separated)