skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Self-diagnosis for central locking > < Test table for vehicles 05.01 ? (3rd generation convenience system)

Octavia Mk1

Adaptation
Adaptation
Valid for vehicles ► 07. 98 (1st and 2nd generation convenience system)
   
Channel numberPage
00 - Adaptation of ignition keys with radio control, erase initialised keys 1)2) → Anchor
01 - Adaptation of ignition keys with radio control, initialise initialised keys 1)2) → Anchor
03 - Automatic lock/unlock: The vehicle is locked when a speed of 15 km/h is reached 2) → Anchor
04 - IRUE cut-off: To activate or deactivate the interior monitoring press CL-ZU twice 2) → Anchor
05 - Unlock Horn tone off and on 2) → Anchor
06 - Lock Horn tone off and on 2) → Anchor
07 - Unlock Turn signal lights flash off and on 2) → Anchor
08 - Lock Turn signal lights flash off and on 2) → Anchor

1) For vehicles ► 09.97.
2) For vehicles 10.97 ►.
Adaptation of ignition keys with radio control
  Note
t  Only on control units with radio control receiver → Chapter.
t  If new or additional ignition keys are required they must be adapted to the control electronics of the immobilizer and convenience system.
t  Always adapt all ignition keys, i.e. also the available ignition keys.
t  The number of already adapted keys is displayed by selecting the function adaptation.
t  The adaptation can be interrupted with key „C“ of -V.A.G 1552-.
t  The operating number (workshop code) of the -V.A.G 1552- is stored when adapting the ignition keys of the immobilizer control.
Requirements:
t  All ignition keys must be available. If no old ignition key is available, see „Lost key procedure“, → Electrical System → Rep. gr.96
t  Key fob with concealed secret number available. If not, see „Determining the secret number“ → Electrical System → Rep. gr.96
t  Insert the mechanically operational ignition key in the ignition lock.
–  Connecting vehicle system tester -V.A.G 1552- and selecting the address word for the convenience system → Chapter.
   
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Enter channel number 00 (all the keys are erased with channel number 00) and confirm entry with the Q key.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Confirm the entry with key Q.
  
Adaptation                             Q
Erase initialisation values?
Readout on display:
–  Press → key.
  
Adaptation                            ->
Initialisation values erased
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Enter channel number 01 (all the keys are erased with channel number 01) and confirm entry with the Q key.
  
Adaptation                            
Enter channel number XX
Readout on display:
The top line shows how many keys need to be initialised (Standard = 1). Select number of the keys using the keys ↑ and ↓. Maximum number of all the initiated keys = 4.
  
Channel 1     Adaptation       1 ->
Key                      1    - ↑ - ↓ -
Read-out on the display: Number of radio control keys to be initialised.
–  Confirm the entry with key Q.
  
Channel 1        Adaptation     3 Q
Key                      3    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 1        Adaptation     3 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 1     Adaptation       3 ->
Changed value stored
Readout on display:
–  Switch off ignition and withdraw ignition key.
–  Press a button once on each of the radio control keys to be initialised (in the example above on 3 keys)
  Note
t  All 3 keys (see example) must be initialised during a single initialisation process.
t  When adapting all keys never exceed the 30 second limit.
The ignition key adaptation is automatically terminated if:
t  The number of keys to be adapted has been reached.
t  A button on a radio control key to be initialised has been pressed more than once.
t  The allowed adaptation time of 30 seconds after switching on the ignition with the 2nd key has been exceeded (fault is stored).
The required adaptation process is confirmed by a brief horn tone.
–  Switch on ignition.
–  Select function 02 „Interrogate fault memory“. The key adaptation has been successfully completed if no fault was stored.
–  Select function 06 „end output“ → Chapter.
–  Perform a functional test of all radio control keys.
Auto - Lock/Unlock:The vehicle is locked when a speed of 15 km/h is reached (activating or deactivating function)
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 3.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 3     Adaptation       0 ->
Automatic lock/unlock off       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 3        Adaptation     1 Q
Automatic lock/unlock on       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 3        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 3     Adaptation       1 ->
Changed value stored
Readout on display:
IRUE cut-off: To activate or deactivate the interior monitoring press CL-ZU twice
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 4.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 4     Adaptation       0 ->
Interior monitoring off - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 4        Adaptation     1 Q
Interior monitoring   on - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 4        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 4     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the alarm when unlocking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 5.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 5     Adaptation       0 ->
unlocked    Beep off       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 5        Adaptation     1 Q
unlocked    Beep on     - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 5        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 5     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the alarm when locking
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 6.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 6     Adaptation       0 ->
locked  Beep  off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 6        Adaptation     1 Q
locked  Beep  on     - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 6        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 6     Adaptation       3 ->
Changed value stored
Readout on display:
Activate and deactivate the turn signal lights when unlocking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 7.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 7     Adaptation       0 ->
unlocked   Flashing   off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 7        Adaptation     1 Q
unlocked   Flashing   on    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 7        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 7     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the turn signal lights when locking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 8.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 8     Adaptation       0 ->
locked   Flashing   off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 8        Adaptation     1 Q
locked   Flashing   on    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 8        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 8     Adaptation       1 ->
Changed value stored
Readout on display:
Adaptation for vehicles 08. 98 ► (2nd/5th and 3rd generation convenience system)
  
Vehicle system test               HELP
Select function XX
Channel numberPage
00 - Adaptation of ignition keys with radio control, erase initialised keys → Anchor
01 - Adaptation of ignition keys with radio control, initialising new keys → Anchor
03 - Automatic lock/unlock: The vehicle is locked when a speed of more than 15 km/h is reached → Anchor
04 - Automatic lock/unlock: The vehicle is unlocked when the ignition key is removed from the ignition lock → Anchor
05 - IRUE cut-off: To activate or deactivate the interior monitoring press CL-ZU twice2) → Anchor
06 - Unlock Horn tone off and on → Anchor
07 - Lock Horn tone off and on → Anchor
08 - Unlock Turn signal lights flash off and on → Anchor
09 - Lock Turn signal lights flash off and on → Anchor
10 - Alarm horn settings: Programming of the alarm reaction in the event of an alarm in compliance with the applicable country legislation → Anchor

Adaptation of ignition keys with radio control
Perform a new key adaptation if the remote control has been pressed 200 times outside the reception range, or if a new key is added to the key set:
1. - using an adapted ignition key
2. - using vehicle system tester -V.A.G 1552-
Adaptation using an initialised (adapted) ignition key
–  Insert the mechanically operational (adapted) ignition key in the ignition lock.
–  Switch on ignition.
–  Using the new key (to be initialised) mechanically lock the vehicle (e.g. the driver's door) and subsequently press one of the radio buttons on the key.
–  Press the radio button repeatedly after an interval of more than one second (end key initialisation).
–  The required adaptation process is confirmed by a brief horn tone.
  Note
If new or additional ignition keys are required they must be adapted to the control electronics of the immobilizer.
Adaptation with vehicle system tester -V.A.G 1552-
  Note
t  Only on control units with radio control receiver → Chapter.
t  If new or additional ignition keys are required they must be adapted to the control electronics of the immobilizer and convenience system ⇒ Electrical System, Rep. Gr. 96.
t  Always adapt all ignition keys, i.e. also the available ignition keys.
t  The number of already adapted keys is displayed by selecting the function adaptation.
t  The adaptation can be interrupted with key „C“ of -V.A.G 1552-.
t  The operating number (workshop code) of the -V.A.G 1552- is stored when adapting the ignition keys of the immobilizer control.
Requirements:
t  All ignition keys must be available. If no old ignition key is available, see „Lost key procedure“, → Electrical System → Rep. gr.96
t  Key fob with concealed secret number available. If not, see „Determining the secret number“ → Electrical System → Rep. gr.96
t  Insert the mechanically operational ignition key in the ignition lock.
–  Connecting vehicle system tester -V.A.G 1552- and selecting the address word for the convenience system → Chapter.
   
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 0 (all the keys are erased with channel number 00).
–  Confirm the entry with key Q.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Confirm the entry with key Q.
  
Adaptation                             Q
Erase initialisation values?
Readout on display:
–  Press → key.
  
Adaptation                            ->
Initialisation values erased
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 1 (all the keys are erased with channel number 01).
  
Adaptation                            
Enter channel number XX
Readout on display:
The top line shows how many keys need to be initialised (Standard = 1). Select number of the keys using the keys ↑ and ↓. Maximum number of all the initiated keys = 4.
–  Press → key.
  
Channel 1     Adaptation       1 ->
Key                      1    - ↑ - ↓ -
Read-out on the display: Number of radio control keys to be initialised.
–  Confirm the entry with key Q.
  
Channel 1        Adaptation     3 Q
Key                      3    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 1        Adaptation     3 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 1     Adaptation       3 ->
Changed value stored
Readout on display:
–  Switch off ignition.
–  Press a button once on each of the radio control keys to be initialised (in the example above on 3 keys)
  Note
t  All 3 keys (see example) must be initialised during a single initialisation process.
t  When adapting all keys never exceed the 30 second limit.
The ignition key adaptation is automatically terminated if:
t  the number of keys to be adapted has been reached.
t  a button on a radio control key to be initialised has been pressed more than once.
t  the allowed adaptation time of 30 seconds after switching on the ignition with the 2nd key has been exceeded (fault is stored).
The required adaptation process is confirmed by a brief horn tone.
–  Select function 02 „Interrogate fault memory“. The key adaptation has been successfully completed if no fault was stored.
–  Perform a functional test of all radio control keys.
Auto - Lock/Unlock:The vehicle is locked when a speed of 15 km/h is reached (activating or deactivating function)
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 3.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 3     Adaptation       0 ->
Automatic lock/unlock off       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 3        Adaptation     1 Q
Automatic lock/unlock on       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 3        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 3     Adaptation       1 ->
Changed value stored
Readout on display:
Automatic lock/unlock: The vehicle is unlocked when the ignition key is removed from the ignition lock
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 4.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 4     Adaptation       0 ->
Auto-Unlock     off         - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 4        Adaptation     1 Q
Auto-Unlock     on         - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 4        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 4     Adaptation       1 ->
Changed value stored
Readout on display:
IRUE cut-off: To activate or deactivate the interior monitoring press CL-ZU twice
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 5.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 5     Adaptation       0 ->
Interior monitoring off - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 5        Adaptation     1 Q
Interior monitoring   on - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 5        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 5     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the alarm when unlocking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 6.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 6     Adaptation       0 ->
unlocked    Beep off       - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 6        Adaptation     1 Q
unlocked    Beep on     - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 6        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 6     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the alarm when locking
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 7.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 7     Adaptation       0 ->
locked  Beep  off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 7        Adaptation     1 Q
locked  Beep  on     - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 7        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 7     Adaptation       3 ->
Changed value stored
Readout on display:
Activate and deactivate the turn signal lights when unlocking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 8.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 8     Adaptation       0 ->
unlocked   Flashing   off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 8        Adaptation     1 Q
unlocked   Flashing   on    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 8        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 8     Adaptation       1 ->
Changed value stored
Readout on display:
Activate and deactivate the turn signal lights when locking
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 0 and 9.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 9     Adaptation       0 ->
locked   Flashing   off    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 9        Adaptation     1 Q
locked   Flashing   on    - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 9        Adaptation     1 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 9     Adaptation       1 ->
Changed value stored
Readout on display:
Alarm horn settings: Programming of the alarm reaction in the event of an alarm in compliance with the applicable country legislation
–  Enter function 10.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Confirm the entry with key Q.
  
Vehicle system test                Q
10 - Adaptation
Readout on display:
–  Press keys 1 and 0.
  
Adaptation                            
Enter channel number XX
Readout on display:
–  Select adaptation value with the keys ↑ and ↓.
  
Channel 10     Adaptation       1 ->
Setting    Alarm horn    rest of Europe - ↑ - ↓ -
Readout on display:
  
Channel 10        Adaptation     2 Q
Setting    Alarm horn    Germany - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 10        Adaptation     3 Q
Setting    Siren in Great Britain - ↑ - ↓ -
Readout on display:
–  Confirm the entry with key Q.
  
Channel 10        Adaptation     3 Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 10     Adaptation       3 ->
Changed value stored
Readout on display:
  
Vehicle system test               HELP
Select function XX

Self-diagnosis for central locking > < Test table for vehicles 05.01 ? (3rd generation convenience system)