Readout on -V.A.G 1552- | Possible cause of fault | Rectifying fault |
00000 | |
No fault detected | If after repair „No fault detected“ is displayed, the self-diagnosis is completed. |
65535 | | |
Control unit defective | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00849 | | |
S contact on ignition starter switch D undefined switch status | t
| Terminal 15 O.K., S contact defective |
t
| Wiring or plug connections defective |
| –
| Reading measured value block, display group number 10 → Anchor |
–
| Check wiring and plug connections according to the current flow diagram |
|
00912 | | |
Front left window lifter switch -E40- implausible signal short circuit to earth | t
| Wiring or plug connections defective |
t
| Front left window lifter switch -E40- defective |
t
| Front left window lifter switch loose |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Replace front left window lifter switch -E40- |
–
| Check the attachment of the window lifter switch |
–
| Read measured value block, display group number 002 → Anchor |
|
00913 | | |
Front right window lifter switch in the driver's door -E81- implausible signal short circuit to earth | t
| Wiring or plug connections defective |
t
| Front right window lifter switch -E81- defective |
t
| Front right window lifter switch loose |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Replace front right window lifter switch -E81- |
–
| Check the attachment of the window lifter switch |
–
| Read measured value block, display group number 002 → Anchor |
|
00914 | | |
Rear left window lifter switch in the driver's door -E53- implausible signal short circuit to earth | t
| Wiring or plug connections defective |
t
| Rear left window lifter switch -E53- defective |
t
| Rear left window lifter switch loose |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Replacing rear left window lifter switch |
–
| Check the attachment of the window lifter switch |
–
| Read measured value block, display group number 002 → Anchor |
|
00915 | | |
Rear right window lifter switch in the driver's door -E55- implausible signal short circuit to earth | t
| Wiring or plug connections defective |
t
| Rear right window lifter switch -E55- defective |
t
| Rear right window lifter switch loose |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Replacing rear right window lifter switch |
–
| Check the attachment of the window lifter switch |
–
| Read measured value block, display group number 002 → Anchor |
|
00928 | | |
CL lock unit on the driver's side -F220- implausible signal |
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on driver's door |
t
| Resistance in the mechanism of the locking unit and control elements |
| –
| Read measured value block, display group number 003 → Anchor |
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation |
|
wrong equipment | t
| other locking unit type fitted 1) |
| |
00929 | | |
CL lock unit on the passenger's side -F221- implausible signal |
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on passenger's door |
t
| Resistance in the mechanism of the locking unit and control elements |
| –
| Read measured value block, display group number 006 → Anchor |
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation |
|
wrong equipment | t
| other locking unit type fitted 1) |
| |
00930 | | |
CL lock unit rear left - F 222 implausible signal
wrong equipment |
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on rear left door |
t
| Resistance in the mechanism of the locking unit and control elements |
t
| other locking unit type fitted 1) |
| –
| Read measured value block, display group number 008 → Anchor |
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation |
|
00931 | | |
CL lock unit rear right -F223- implausible signal
wrong equipment |
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on rear right door |
t
| Resistance in the mechanism of the locking unit and control elements |
t
| other locking unit type fitted 1) |
| –
| Read measured value block, display group number 007 → Anchor |
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation |
|
00932 | | |
Window lifter motor driver's side -V147- implausible signal
|
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on driver's door |
t
| Window lifter mechanism stiff 2) |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation 2) |
|
no setting or incorrect setting | t
| No initialisation for automatic lift/lower lift mechanism |
| |
00933 | | |
Window lifter motor front passenger side -V148- implausible signal
|
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on passenger's door |
t
| Window lifter mechanism stiff 2) |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation 2) |
|
no setting or incorrect setting | t
| No initialisation for automatic lift/lower lift mechanism |
| |
00934 | | |
Window lifter motor rear left -V26- implausible signal
|
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on rear left door |
t
| Window lifter mechanism stiff 2) |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation 2) |
|
no setting or incorrect setting | t
| No initialisation for automatic lift/lower lift mechanism |
| |
00935 | | |
Window lifter motor rear right - V27 implausible signal
|
t
| Wiring or plug connections defective |
t
| No supply voltage for CL on rear right door |
t
| Window lifter mechanism stiff 2) |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Check mechanism and ensure smooth operation 2) |
|
no setting or incorrect setting | t
| No initialisation for automatic lift/lower lift mechanism |
| |
00936 | | |
Window lifter switch in the front passenger door - E107 implausible signal 3) short circuit to positive |
t
| Wiring or plug connections defective |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Read measured value block, display group number 005 → Anchor |
|
00937 | | |
Window lifter switch in the rear left door - E52 implausible signal 3) short circuit to positive |
t
| Wiring or plug connections defective |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Read measured value block, display group number 008 → Anchor |
|
00938 | | |
Window lifter switch in the rear right door - E54 implausible signal 3) short circuit to positive |
t
| Wiring or plug connections defective |
|
–
| Check wiring and plug connections according to the current flow diagram |
–
| Read measured value block, display group number 007 → Anchor |
|
00939 | | |
Motor for mirror adjustment driver's side -V149- | t
| Wiring or plug connections defective |
t
| No supply voltage on driver's door |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00940 | | |
Motor for mirror adjustment front passenger side - V150 | t
| Wiring or plug connections defective |
t
| No supply voltage on front passenger door |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00943 | | |
Heated exterior mirror driver's side - Z4 | t
| Mirror heating defective |
t
| Wiring or plug connections defective |
t
| No supply voltage on driver's door |
| –
| Replace exterior mirror |
–
| Check wiring and plug connections according to the current flow diagram |
|
00944 | | |
Heated exterior mirror on front passenger side -Z5- | t
| Mirror heating (front passenger side) defective |
t
| Wiring or plug connections defective |
t
| No supply voltage on front passenger door |
| –
| Replace exterior mirror |
–
| Check wiring and plug connections according to the current flow diagram |
|
00945 | | |
Crash sensor for front airbag -G190- | | |
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| The outlet can also be checked with the final control diagnosis for airbag → Chapter |
|
00946 | | |
Interior light - W | | |
Short circuit to positive | t
| Wiring or plug connections defective |
t
| Interior light or one of the reading lights defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00948 | | |
Close sliding roof signal | | |
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00949 | | |
Motor for CL tailgate LOCK (locked) implausible signal | t
| Wiring or plug connections defective |
t
| Lock control mechanism defective |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Check lock control mechanism and ensure smooth operation |
|
00950 | | |
Motor for CL tailgate UNLOCK (unlocked) implausible signal | t
| Wiring or plug connections defective |
t
| Lock control mechanism defective |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Check lock control mechanism and ensure smooth operation |
|
00952 | | |
Signal for driver's door open | | |
Short circuit to positive | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00953 | | |
Time limit of interior light | | |
implausible signal | t
| Wiring or plug connections defective |
t
| Interior light and reading light wrongly connected |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Check wiring and plug connections according to the current flow diagram |
|
00954 | | |
Terminal 50 relay | | |
Short circuit to positive | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
00955 | | |
Key 1 outside of reception range Adaption limit exceeded | t
| Key was operated over 200 times outside the reception range |
| –
| Read measured value block, display group number 013 → Anchor |
|
00956 | | |
Key 2 outside of reception range Adaption limit exceeded | t
| Key was operated over 200 times outside the reception range |
| –
| Read measured value block, display group number 013 → Anchor |
|
00957 | | |
Key 3 outside of reception range Adaption limit exceeded | t
| Key was operated over 200 times outside the reception range |
| –
| Read measured value block, display group number 013 → Anchor |
|
00958 | | |
Key 4 outside of reception range Adaption limit exceeded | t
| Key was operated over 200 times outside the reception range |
| –
| Read measured value block, display group number 013 → Anchor |
|
01030 | | |
Lock the CL key switch on the driver's side | | |
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Read measured value block, display group number 003 → Anchor |
|
01031 | | |
Unlock the CL key switch on the driver's side | | |
Implausible signal
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Read measured value block, display group number 003 → Anchor |
|
01032 | | |
Lock the CL key switch on the passenger's side | | |
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Read measured value block, display group number 006 → Anchor |
|
01033 | | |
Unlock the CL key switch on the passenger's side | | |
Implausible signal
Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Read measured value block, display group number 006 → Anchor |
|
01034 | | |
Window lifter: Thermo fuse active, driver | | |
| t
| Wiring or plug connections defective |
t
| Window lifter mechanism loose or stiff |
t
| Resistance in window lifter motor |
| –
| Read measured value block, display group number 003 → Anchor |
–
| Check window lifter motor |
|
01035 | | |
Window lifter: Thermo fuse active, passenger's side | | |
| t
| Wiring or plug connections defective |
t
| Window lifter mechanism loose or stiff |
t
| Resistance in window lifter motor |
| –
| Read measured value block, display group number 006 → Anchor |
–
| Check window lifter motor |
|
01036 | | |
Window lifter: Thermo fuse active, RL | | |
| t
| Wiring or plug connections defective |
t
| Window lifter mechanism loose or stiff |
t
| Resistance in window lifter motor |
| –
| Read measured value block, display group number 008 → Anchor |
–
| Check window lifter motor |
|
01037 | | |
Window lifter: Thermo fuse active, RR | | |
| t
| Wiring or plug connections defective |
t
| Window lifter mechanism loose or stiff |
t
| Resistance in window lifter motor |
| –
| Read measured value block, display group number 008 → Anchor |
–
| Check window lifter motor |
|
01038 | | |
Central locking, thermo fuse | | |
| t
| Wiring or plug connections defective |
t
| Resistance in door locks |
| –
| Read measured value block, display group number 014 → Anchor |
|
01044 | | |
Control unit wrongly coded | | |
| t
| another control unit fitted |
t
| Control unit wrongly coded |
| –
| Check coding of the control unit |
|
01131 | | |
Turn signal control | | |
Open circuit/short circuit to positive
short circuit to earth | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
01134 | | |
Alarm horn -H12- | | |
undefined switch status | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
01135 | | |
Sensors for interior monitoring | | |
Open circuit
defective | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram |
|
01141 | | |
Tailgate release switch -E165- | | |
Short circuit to earth
| t
| Wiring or plug connections defective |
t
| Tailgate release switch -E165- defective |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Replace tailgate release switch -E165- |
|
01179 | | |
Key programming wrong | t
| Key adaptation was not carried out correctly |
| –
| Read measured value block, display group number 003 → Anchor |
|
01328 | | |
Convenience databus | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram | If the wiring is O.K. then:–
| Disconnect all doors and re-connect in sequence. Pay attention to the measured value block. |
–
| Replace the CU blocking the data bus for convenience functions |
–
| Read measured value block, display group number 012 → Chapter |
|
| t
| Control units defective |
| –
| replace relevant control unit |
|
01329 | | |
Data BUS Comfort in emergency running mode | t
| Wiring or plug connections defective |
| –
| Check wiring and plug connections according to the current flow diagram | If the wiring is O.K. then:–
| Disconnect all doors and re-connect in sequence. Pay attention to the measured value block. |
–
| Replace the CU blocking the data bus for convenience functions |
–
| Read measured value block, display group number 012 → Anchor |
|
01330 | | |
Control unit for convenience system | | |
defective no communication | | –
| The system is in order despite the fault entry |
–
| Perform a functional test |
|
Supply voltage too great supply voltage too small | t
| Supply voltage not o.k. |
| –
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Check supply voltage of CU |
|
01331 | | |
Door control unit driver's side -J386 | | |
defective
no communication | | –
| The system is in order despite the fault entry |
–
| Perform a functional test |
–
| Read measured value block, display group number 012 → Anchor |
|
Supply voltage too great supply voltage too small | t
| Supply voltage not o.k. |
| –
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Check supply voltage driver's door |
|
01332 | | |
Door control unit passenger's side -J387- | | |
defective
no communication
| | –
| The system is in order despite the fault entry |
–
| Perform a functional test |
–
| Read measured value block, display group number 012 → Anchor |
|
Supply voltage too great supply voltage too small | t
| Supply voltage not o.k. |
| –
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Check supply voltage front passenger door |
|
01333 | | |
Door control unit rear left -J388- | | |
defective
no communication
| | –
| The system is in order despite the fault entry |
–
| Perform a functional test |
–
| Read measured value block, display group number 012 → Anchor |
|
Supply voltage too great supply voltage too small | t
| Supply voltage not o.k. |
| –
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Check supply voltage door RL |
|
01334 | | |
Door control unit rear right -J389- | | |
defective
no communication
| | –
| The system is in order despite the fault entry |
–
| Perform a functional test |
|
Supply voltage too great supply voltage too small | t
| Supply voltage not o.k. |
| –
| Read measured value block, display group number 012 → Anchor |
–
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Check supply voltage door RR |
|
01358 | | |
Switch for inside locking, driver's side -E150- | | |
Implausible signal Short circuit to earth | t
| Wiring or plug connections defective |
| –
| Check cables, plug connections and fuses in accordance with the current flow diagram |
–
| Read measured value block, display group number 005 → Anchor |
|
01362 | | |
Switch for tailgate: close -F124- | | |
Short circuit to earth | t
| Wiring or plug connections defective |
t
| Resistance in lock control mechanism or lock cylinder |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Check lock control mechanism and ensure smooth operation |
–
| Read measured value block, display group number 010 → Anchor |
|
01389 | | |
Open switch for tailgate -F124- | | |
Implausible signal Short circuit to earth | t
| Wiring or plug connections defective |
t
| Resistance in lock control mechanism or lock cylinder |
| –
| Check wiring and plug connections according to the current flow diagram |
–
| Check lock control mechanism and ensure smooth operation |
–
| Read measured value block, display group number 010 → Anchor |
|