skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Sliding/tilting roof Webasto with glass panel > < Removing and installing assembly unit
Cleaning the water drain hoses
Cleaning the water drain hoses
Front water drain hoses:
The front water drain hoses -1- run in the pillars A and terminate between the door and pillar A. Clean from the sliding/tilting roof opening.
   
1 - Front water drain hose
2 - Water drain valve
  Note
An approx. 2300 mm long probe, self-made out of a tachometer shift linkage core, is recommended as an auxiliary tool for cleaning.
Rear water drain hoses:
The rear water drain hoses -1- run in the C pillars and terminate at the side behind the bumper. Clean from the bottom hose end. The hoses must not be removed.
  S60-0026
1 - Water drain hose
2 - Water drain valve
  Note
An approx. 2300 mm long probe, self-made out of a tachometer shift linkage core, is recommended as an auxiliary tool for cleaning.
Rear water drain hoses (Octavia Combi)
The rear water drain hoses -1- run in the pillars D and terminate at the side behind the shock absorber cover. Clean from the bottom hose end. The bumper does not have to be removed.
  S60-0027
1 - Water drain hose
2 - Water drain valve
  Note
An approx. 2300 mm long probe, self-made out of a tachometer shift linkage core, is recommended as an auxiliary tool for cleaning.
  S60-0032

Sliding/tilting roof Webasto with glass panel > < Removing and installing assembly unit