Octavia Mk1
Summary of components of sliding/tilting roof with glass panel |
1 - | Glass panel for sliding/tilting roof (single-layer safety glass) |
q | Remove glass panel for sliding/tilting roof → Chapter |
q | Install glass panel for sliding/tilting roof → Chapter |
q | Adjust glass panel for sliding/tilting roof (height adjustment) → Chapter |
2 - | Panel seal |
q | Adjust panel seal → Chapter |
q | Sealing joint in the middle of the right lateral area |
q | Handle the clamp channel of the panel seal with lubricant (water) before installing |
3 - | Trim frame |
4 - | Sun screen |
q | Removing and installing sun screen roller → Chapter and → Chapter |
5 - | Assembly unit |
q | Removing and installing assembly unit → Chapter |
q | The assembly unit comprises the following parts: |
q | U-frame (with guide ducts) |
q | Rear guides with cables |
q | Front guides |
q | If necessary grease the guide ducts with special grease -G 052 778- only as otherwise the functions can not be guaranteed |
6 - | Water drain hoses |
q | Clean the water drain hoses → Chapter |
7 - | Hexagonal wrench for emergency operation |
q | clipped into the E-drive |
8 - | Draft deflector |
q | Open the cover towards the rear and unscrew the draft deflector |
9 - | Bearing for draft deflector |
q | Thread must point obliquely towards the rear |
10 - | Screws |
11 - | Countersunk screws (micro encapsulated) |
q | Fixing screws for electric drive mechanism |
q | always use new countersunk screws |
q | 3 Nm |
12 - | E-drive |
q | Check setting for the E-drive (0 position) → Chapter |
13 - | Catch hook spring |
14 - | Hook |
15 - | Torx screw |
q | Torx screw insert -T25- |
q | 6 Nm |
16 - | Circlip |