skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Cleaning the water drain hoses > < Removing and installing assembly unit

Octavia Mk1

Adapting the E-drive
Adapting the E-drive
–  Switch on ignition.
For vehicles of MY 03 ►
   
–  Using the wedge -3409- remove the E-drive cover.
–  Pull out the plug for the E-driver at the roof opening.
–  Connect the plug connection for the E-drive.
–  Insert the cover for the E-drive.
For all vehicles
–  Close sliding/tilting roof.
–  Press automatic preselection mechanism in position „roof closed“ for minimum 3 seconds; the basic setting of the drive is performed.
  S60-0044

Cleaning the water drain hoses > < Removing and installing assembly unit