Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Body | Body Work | Sliding roof | Sliding/tilting roof Webasto with glass panel | Install glass panel for sliding/tilting roof

Install glass panel for sliding/tilting roof

Glass roof must be fitted in the „0“ position (glass roof closed).

–	The sliding-block guide bolt axis must be flush with the marking on the sliding-block guide -arrow-.

–	If the „sliding-block guide axis“ is not flush with the sliding-block guide then parallel running must be adjusted for → Chapter.

–	Insert glass panel for sliding/tilting roof from the top and slightly tighten the fixing screws -1-.

Note

Only tighten the fixing screws after adjusting the panel height (4.5 Nm).

Skoda Workshop Service and Repair Manuals