Setting electric drive mechanism (setting „0“ position) |
Setting of the „0 position“ may be necessary if the drive was not removed in the „0 position“ or if the sliding/tilting roof was opened or closed using the emergency operation mechanism. |
Drive removed and wiring connected. |
–
| Turn the rotary switch of the automatic preselection mechanism to select „roof tilted“. |
–
| Turn the rotary switch of the automatic preselection mechanism to „roof closed“. |
–
| Turn the rotary switch of the automatic preselection mechanism to „roof opened“. |
–
| Turn the rotary switch of the automatic preselection mechanism to „roof closed“. |
–
| In „0 position“ install the drive with the sliding/tilting roof closed. |
|
|
|