Octavia Mk1
Summary of components of sliding/tilting roof with glass panel |
1 - | Glass panel for sliding/tilting roof (single-layer safety glass) |
q | Remove glass panel for sliding/tilting roof → Chapter |
q | Install glass panel for sliding/tilting roof → Chapter |
q | Adjust glass panel for sliding/tilting roof (height adjustment) → Chapter |
2 - | Gasket |
q | Replace panel seal → Chapter |
3 - | Sun screen |
q | Remove and install sun screen → Chapter |
4 - | Guard top |
q | removing → Chapter |
5 - | Guard bottom |
q | removing → Chapter |
6 - | Rain groove |
q | remove together with sliding block guide → Item |
7 - | End part |
q | stick on with glue -AKL 450 005 05- |
8 - | Screw |
9 - | Assembly unit |
q | removing and installing → Chapter |
q | U-frame (with guide nut); if necessary only grease the guide nuts with special grease -G 000 450 02- otherwise the functions cannot be guaranteed. |
10 - | Support |
11 - | Spring |
12 - | E-drive |
q | removing and installing → Chapter |
q | Check setting for the E-drive (0 position) → Chapter |
13 - | Screw |
14 - | Rotary switch of the automatic preselection mechanism |
15 - | E-drive cover |
q | Hexagonal wrench for emergency activation is fixed to the cover |
16 - | Cover |
17 - | Draft deflector |
18 - | 4.5 Nm |
19 - | Sliding-block guide |
20 - | Sliding block with control cable |
21 - | Support |