Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Body | Body Work | Trim, noise insulation | Pillar and side trim panels | Removing and installing trim panel of pillar D (Octavia Combi)

Removing and installing trim panel of pillar D (Octavia Combi)

1 -	Retaining clip

–	Inserted in the trim panel of pillar D.

2 -

Gasket

–	After installing the trim panel, check for correct fitting position of the seal and if necessary adjust.

3 -

Cover

Removing:

–	Removing support of the luggage compartment cover → Chapter.

–	Lever off trim panel from pillar D.

Installing:

–	Check position and condition of the retaining clips -1- and correct when needed, replace clips if necessary.

Installation is carried out in the reverse order.

Skoda Workshop Service and Repair Manuals