skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Multi-pin plug connections with contact assignment for ABS, ABS/EDL/TCS > < Electrical test ABS/EDL/ TCS Mark 60

Octavia Mk1

Test requirements
Test requirements
t  Before starting the test switch off the ignition and electrical consumers (headlights, lighting, blowers etc.).
t  Fuses must be O.K. (to check, remove fuses from the fuse holder) → Current flow diagrams, Electrical fault finding and Fitting locations
–  Remove the protective housing for relays from the cable duct.
   
–  Disconnect the plug -1- from the control unit -J104--arrow a- and remove it -arrow b-.
  S45-0230
–  Connect the test box -V.A.G 1598/36- with adapter -V.A.G 1598/36--1- to the multi-pin plug connection of the control unit -J104--2-.
  Note
The specified values are specific to the -V.A.G 1526 A- and do not necessarily apply for other measuring tools.
  N01-0528

Multi-pin plug connections with contact assignment for ABS, ABS/EDL/TCS > < Electrical test ABS/EDL/ TCS Mark 60