–
| Check pulse rotor by turning the brake disc or the wheel hub |
2 - | Wheel speed sensor -G44- / -G46- |
3 - | Wheel speed sensor screw |
-Arrow- Plug connection of wheel speed sensor - wheel speed sensor cable |
–
| If the chunking of the pulse rotor is blocked by dirt, the pulse rotor must be cleaned. |
–
| If the pulse rotor is damaged, the wheel hub and the pulse rotor must be replaced. |
Remove and install the rear wheel speed sensor cables |
Note t
| It is prohibited to repair shielded leads of the ABS system. |
t
| Before disconnecting the battery determine the code of radio sets fitted with anti-theft coding. |
t
| After connecting the battery, perform the following: |
–
| on vehicles with radio encoding, carry out the coding, |
–
| initialise power windows on vehicles fitted with power windows → BookletOctavia |
t
| The figures show only the rear axle with disc brake. |
t
| Parts of the ABS system on the rear axle with drum brake are analogous to the version with disc brake. |
|
|
|