| Electrical test ABS/EDL/TCS/ESP Mark 60 |
| Special tools and workshop equipment required |
| t
| Handheld multimeter, e.g. -V.A.G 1526 A- |
| t
| Measuring tool set -V.A.G 1594/A- |
| t
| Test box -V.A.G 1598/A- |
| t
| Adapter -V.A.G 1598/36- |
| The test steps → Anchor apply only to vehicles with ABS/EDL/TCS/ESP, |
| t
| for which the self-diagnosis does not indicate the fault source. In this case the full electric inspection must be carried out. |
| t
| for which the self-diagnosis gives a direct indication of the fault source. Then only perform the test steps recommended in the fault table (targeted approach). |
|
|
|
