Octavia Mk1
| Handbrake lever - Summary of components |
| 1 - | Handbrake lever |
| t | before the removal, remove the centre console → Body Work; Rep. gr.68. |
| 2 - | Door handle |
| t | pull it out towards the front, first of all press the catch peg below the door handle towards the bottom using a small screwdriver |
| 3 - | Covering for the hand brake lever |
| t | removing: → Body work; Rep. gr.68. |
| 4 - | Centre console |
| t | removing: → Body work; Rep. gr.68. |
| 5 - | 1.4 Nm |
| 6 - | Nut, 18 Nm |
| 7 - | Compensating clamp |
| 8 - | Self-locking adjusting nut |
| t | replace after each removal |
| t | Setting the hand-brake: |
| – | Vehicles with drum brakes → Chapter. |
| – | Vehicles with disc brakes → Chapter. |
| 9 - | Handbrake cable |
| t | Fitting position of the hand-brake cables → Fig. |
| t | removing and installing (drum brake) → Chapter |
| t | removing and installing (disc brake) → Chapter |
| t | different versions for the rear drum brake and disc brake → Electronic Catalogue of Original Parts. |
| 10 - | Switch for hand-brake control |
| t | clipped |
| t | replace if defective |
Note