Octavia Mk1
Note
| 1 - | Brake servo unit with mechanical brake assistance |
| t | all vehicles without ABS |
| t | Right-hand drive vehicles with ABS, ABS/EDL |
| - Brake servo unit with mechanical brake assistance |
| t | mechanical brake assistance integrated in the brake servo unit |
| t | The brake assistance can only be recognized by the spare part number of the brake servo unit |
| t | Assignment → Electronic Catalogue of Original Parts |
| t | The brake assistance cannot be repaired, replace the brake servo unit completely when handling a fault → Chapter |
| - Continued for all brake servo units |
| t | check → Chapter |
| t | removing and installing → Chapter |
| t | if there are faults replace completely |
| t | separate from brake pedal → Chapter |
| t | on petrol engines the required negative pressure is drawn from the induction pipe |
| t | vehicles using a diesel engine are fitted with a vacuum pump for generating a low pressure |
| t | Non-return valve (in the vacuum hose of the vacuum pump) |
| 2 - | Screw cap |
| t | with integrated brake fluid level warning contact -F34- |
| 3 - | Brake fluid reservoir |
| t | with lateral catches for locking screw |
| 4 - | Plugs |
| 5 - | Plugs |
| t | moisten with brake fluid and press expansion reservoir into the sealing surfaces |
| 6 - | Self-locking nut, 20 Nm |
| 7 - | Master brake cylinder |
| t | cannot be repaired, replace completely in the event of faults |
| t | Check tightness → Chapter |
| 8 - | Locking screw for brake fluid reservoir, 10 Nm |
| 9 - | Sealing ring |
| t | replace |
| 10 - | Gasket |
| t | for brake servo unit |
| t | between brake servo unit and bulkhead |
| t | replace |
| 11 - | Self-locking nut, 28 Nm |
| replace |
