skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Check the feed pressure of the vane pump > < Summary of components for the vane pump located at the top and bottom

Octavia Mk1

PAS pressure switch
PAS pressure switch
  Note
The pressure switch screwed into the vane pump is used for the idling speed stabilisation of the engine while moving the steering wheel when the vehicle is standing still.
   
1 - Vane pump
2 - Suction line
3 - Pressure line
4 - Pressure switch, 15 Nm
t  switches at 4.0 MPa (40 bar)
t  Test signal → Injection and Ignition System; Rep. gr.24
5 - Sealing ring
t  replace
6 - Hollow screw, 38 Nm
7 - Sealing ring
t  replace
8 - Colour marking on suction line
t  all around white or yellow, must be positioned inside the bracket (- Pos.9)
9 - Support
10 - Nut
11 - Support

   

Check the feed pressure of the vane pump > < Summary of components for the vane pump located at the top and bottom