Observe the following points to prevent injury to persons and/or damage to the injection and ignition system: |
t
| Do not disconnect or connect ignition cables when the engine is running or operating at starting speed. |
t
| Ignition must be switched off before disconnecting and re-connecting cables of the fuel injection and ignition system as well as of test equipment. |
If test and measuring devices are required during test drives observe the following: |
t
| Always secure the test and measuring devices on the rear seat and have a second person operate them there. |
If the test and measuring devices are operated from the passenger seat the passenger could be injured by the release of the passenger airbag in the event of an accident. |
t
| If the engine must be operated at start speed without the engine starting: |
For engine with identification characters AXP |
|
|
|