Octavia Mk1
| Disassembling and assembling intake manifold |
| 1 - | Throttle valve control unit |
| q | check → Chapter |
| q | when replacing the engine control unit, , adapt → Chapter |
| 2 - | 10 Nm |
| 3 - | Gasket |
| q | replace |
| 4 - | Inlet connection |
| 5 - | Gasket ring |
| q | replace if damaged |
| 6 - | 20 Nm |
| 7 - | Gasket ring |
| q | replace |
| 8 - | Guide plate |
| q | pay attention to correct installation position |
| q | replace if damaged |
| 9 - | O-ring |
| q | replace if damaged |
| 10 - | 3 Nm |
| 11 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| q | Test intake air temperature sender → Chapter |
| q | Specified resistance → Fig. |
| q | Check intake manifold pressure sender → Chapter |
| 12 - | Intake manifold |
| 13 - | Vacuum hose |
| q | from fuel pressure regulator |
