skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Display group 061, Speed control - EPC system > < Display group 056, engine speed control - idling speed stabilisation

Octavia Mk1

Display group 060, Speed control - adapting1) the EPC system
   
Display group 060, Speed control - adapting1) the EPC system
l  Ignition on, engine stopped
l  Control unit in function 04 “Initiate basic setting”
System in basic setting 60 →⇐ Readout on display  
xx %xx %xText   
1234⇐ Display fieldsSpecification
Analysis
    Adaption state (ADP runs, ADP o.k. or ADP ERROR)
ADP o.k.
---
   Learning steps counter0...8---
  Throttle valve angle (potentiometer 2 -G188 -)90...10 %---
 Throttle valve angle (potentiometer 1 -G187-)10...90 %---

1) Adapt the engine control unit to the throttle valve control unit → Chapter.
  Note
t  Re display field 060:
t  Carry out the adaptation of throttle valve control unit with the ignition switched on.
t  When display group 060 is selected in function 04 “Initiate basic setting”, the engine control unit is adapted to the throttle valve control unit. This adaption must be performed if another throttle valve control unit (or the complete engine), or another engine control unit, has been installed.
t  If the voltage supply has been interrupted (battery disconnected), it is also necessary to carry out adaption → Chapter.
   

Display group 061, Speed control - EPC system > < Display group 056, engine speed control - idling speed stabilisation