Octavia Mk1
| Removing and installing parts of engine on the engine block side |
| 1 - | Cylinder block |
| q | Disassembling and assembling the cylinder block → Chapter. |
| q | Disassembling piston and conrod → Chapter. |
| 2 - | 50 Nm |
| q | Tightening sequence: first top right bolt, then bottom right bolt, and last the bolts at the left (looking in direction of travel) |
| 3 - | Oil filter |
| q | tighten by hand |
| q | pay attention to installation instructions on oil filter |
| 4 - | 20 Nm + torque a further 1/4 turn (90 °) |
| 5 - | Compact holder |
| q | for air conditioning compressor and AC generator |
| q | Removing and installing compact holder for vehicles with air conditioning → Heating, Air Conditioning; Rep. Gr.87 |
| 6 - | 13 Nm |
| 7 - | Oil pan |
| q | removing and installing → Chapter |
| 8 - | Gasket ring |
| q | replace |
| 9 - | Oil drain plug, 30 Nm |
| 10 - | 45 Nm |
| 11 - | Washer |
| 12 - | Tensioning pulley |
| 13 - | Tensioning element |
