Octavia Mk1
Removing and installing ignition system |
1 - | Ignition lead |
q | 4…8 kΩ |
q | with shielded plug and spark-plug |
q | Use extractor -T10112- to unplug spark plug connector. |
2 - | Ignition transformer -N, N128- |
q | with identification for ignition leads: |
A = Cylinder 1 |
B = Cylinder 2 |
C = Cylinder 3 |
D = Cylinder 4 |
q | with power output stage -N122- |
q | resistances → Chapter |
3 - | 10 Nm |
4 - | Connector |
q | 4-pin |
5 - | Knock sensor -G61- |
q | contacts of sender and of connector gold-plated |
6 - | 3-pin plug connection |
q | contacts gold-plated |
q | black |
7 - | 20 Nm |
q | The tightening torque influences the knock sensor function |
8 - | Spark plug, 20...30 Nm |
q | Type and electrode gap → Inspection and Maintenance |
q | use spark plug wrench, (e.g. -3122 B-) for removing and installing |
9 - | Connector |
q | for engines with engine code AVU |
q | for the camshaft position sensor -G163- |
q | contacts of sender and of connector gold-plated |
q | 3-pin |
10 - | Support |
q | for engines with engine code AVU |
q | for camshaft position sensor -G163- |
11 - | Camshaft position sensor -G163- |
q | for engines with engine code AVU |
q | check → Chapter |
12 - | Camshaft sprocket |
q | for engines with engine code letters AVU with trim for hall sender |
q | removing and installing → 1.6 l/75 kW Engine, Mechanical Components; Rep. Gr.15 |
13 - | 10 Nm |
q | for engines with engine code AVU |
14 - | 100 Nm |
q | to release and tighten use counterholder -3415- |
15 - | 10 Nm |
q | for engines with engine code BFQ |
16 - | Camshaft position sensor -G163- |
q | for engines with engine code BFQ |
q | check → Chapter |
17 - | Gasket ring |
q | for engines with engine code BFQ |
q | replace if damaged |
q | before fitting moisten with clean engine oil |
18 - | Rotor |
q | for engines with engine code BFQ |
q | on the camshaft |