skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Procedure > < Adapting the 4AV control unit to the throttle valve control unit J338
Test conditions
Test conditions
l  No fault in fault memory, interrogating fault memory → Chap. 01-1
l  All electrical consumers such as lights and rear window heater must be switched off
l  The throttle valve must be in idling position
l  Accelerator pedal not pressed
l  Coolant temperature above 5 °C, but below 100 °C
l  Intake air temperature below 100 °C
l  Battery voltage at least 11.5 volts
l  For vehicles with cruise control system:
   Check whether the function is activated → Chap. 01-1. If “G” does not appear in the control unit identification, the cruise control system should be activated → Chapter.
   

Procedure > < Adapting the 4AV control unit to the throttle valve control unit J338