skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Connecting up the vehicle system tester V.A.G 1552 and selecting the control unit for engine electronics > < Interrogating control unit version
Overview of the selectable functions on the Vehicle system testerV.A.G 1552
Overview of the selectable functions on the Vehicle system tester -V.A.G 1552-
The preconditions for selecting the desired functions are given in the following table.
   
OperationPrecondition 
 Engine not running, ignition switched onEngine idlingNormal driving
01Interrogating control unit versionyesyesyes 
02Interrogating fault memoryyes → Noteyesyes
03Actuator diagnosisyesnono
04Basic setting → Noteyesyesno
05Erasing fault memoryyesyesno
06Ending outputyesyesyes
07Coding control unityesnono
08Reading measured value blockyesyesyes
11Login procedureyesnono
15Reading Readiness Codeyesyesyes

1)  Only to be carried out with the ignition switched on and if the engine does not start (activate starter for at least 6 seconds beforehand).
2)  To be carried out after the following operations: Replace engine control unit, throttle valve control unit, EGR valve, or engine or disconnect battery.
   

Connecting up the vehicle system tester V.A.G 1552 and selecting the control unit for engine electronics > < Interrogating control unit version