Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.6 l/75 kW Engine, Fuel Injection and Ignition System | Self diagnosis, V.A.G Inspection Service | Self-diagnosis IV | Reading readiness code

Procedure

–	Connect vehicle system tester -V.A.G 1552-. Switch ignition on and select “address word” 01 Engine electronics → Chap. 01-1.

–	Enter function 15“Readiness code” and confirm with Q.

The following readout must appear in the display after successfully completing all the checks:

–

Press →.

–	Enter function 06“End output” and confirm with Q.

Readiness code                        ->

00000000 - Test complete

Read-out on display:

Not all checks were performed successfully.

–

Press →.

–	Generate readiness code → Chapter.

Readiness code                        ->

00101101 - Test not complete

Skoda Workshop Service and Repair Manuals