Octavia Mk1
| Display group 062 Engine speed control EPC system |
| Ignition on, engine stopped |
| Reading measured value block 62 | → | [lt ] Readout on display | |||||
| xx.x % | xx.x % | xx.x % | xx.x % | ||||
| 1 | 2 | 3 | 4 | [lt ] Display field | Specification | Analysis | |
| Sender 2 for accelerator pedal position -G185- | 3,0…48,0 % | --- | |||||
| Sender 1 for accelerator pedal position -G79- | 6,0…96,0 % | --- | |||||
| Throttle valve angle (potentiometer 2 -G188-) | 97,0…3,0 % | --- | |||||
| Throttle valve angle (potentiometer 1 -G187 -) | 3,0…97,0 % | --- | |||||
Note| t | to display group 062: |
| t | The potentiometer on the throttle valve control unit and of the pedal value sensor are duplicated for safety reasons. The engine control unit constantly verifies the plausibility of the potentiometers. |
| t | The value of sensor -2 for accelerator pedal position - G185- must always be half of the value of sender 1 for accelerator pedal position -G79-. |
| t | The potentiometers of the throttle valve control unit contra-rotate. The value of both potentiometers together must always be approx. 100 %. |
| t | The specifications stated are not fully utilised. |
