Octavia Mk1
| Individual components of system - Installation overview |
| 1 - | Lambda probe -G39-, 55 Nm |
| q | Fitting location: in the front exhaust pipe |
| 2 - | 4-pin plug |
| q | for lambda probe -G39- |
Note| The 4-pin plug to the lambda probe is located on the vehicle floor to the right next to the lambda probe below a plastic cover. |
| 3 - | Activated charcoal filter system solenoid valve 1 -N80- |
| q | Connect activated charcoal filter system solenoid valve |
| → 1.6 ltr./55 kW Engine, Mechanics; Rep. Gr.20 |
| 4 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| 5 - | Engine control unit -J382- |
| 6 - | Throttle valve control unit -J338- |
| 7 - | Knock sensor 1 -G61- |
| q | → Chapter |
| 8 - | Ignition transformer -N152- |
| q | → Chapter |
| 9 - | Fuel distributor |
| 10 - | Earth connection |
| 11 - | Fuel pressure regulator |
| 12 - | Ignition distributor |
| q | → Chapter |
| 13 - | Earth connection |
| 14 - | Coolant temperature sender -G62- |
| 15 - | Injector - N30- to -N33- |
| 16 - | Air filter |
| q | removing → Fig. |
| 17 - | Spark plug, 25°Nm |
| q | → Chapter |
| 18 - | Oil pressure switch |
| 19 - | Activated charcoal filter |
| q | Connect activated charcoal filter system solenoid valve |
| → 1.6 ltr./55 kW Engine, Mechanics; Rep. Gr.20 |
