Parts of the Cooling System |
Note t
| When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs. |
t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
t
| Use pliers for spring-type clips when installing the spring-type clips. |
t
| Always replace seals and gasket rings. |
t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose). |
t
| Checking the coolant system for tightness → Chapter. |
3 - | Heat exchanger for heating |
5 - | Coolant regulator housing |
–
| after replacing the radiator fill entire system with fresh coolant |
|
|
|