Note | –
| Disassembling and assembling cylinder block, crankshaft and flywheel → Chapter |
| –
| Disassembling and assembling piston and conrod → Chapter |
| –
| Tightening sequence: first top right bolt, then bottom right bolt, and last the bolts at the left (looking in direction of travel) |
| –
| slacken with tensioning strap |
| –
| after topping up with oil, check for leaks |
| –
| Clean sealing surfaces before installing |
| –
| Apply → Chapter silicone sealant on the sealing surfaces -D 176 404 A2- |
| 8 - | Oil drain plug, 20 Nm |
| –
| for vane pump and generator |
|
|
|
