skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel tank with attached parts and fuel filter > < Checking the coolant system for tightness

Octavia Mk1

Removing and installing parts of the fuel supply system
Removing and installing parts of the fuel supply system
  Note
t  Always replace the seals and gaskets during assembly work.
t  Always replace clamp-type clips with spring-type clips.
t  Fuel hoses at the engine must only be secured with spring-type clips. The use of clamp-type or screw-type clips is not allowed.
t  Use pliers for spring strap clips to fit the spring strap clips.
Observe safety measures → Chapter.
Observe rules for cleanliness → Chapter.
Removing and installing parts of the activated charcoal filter system → Chapter.
Repairing the accelerator control → Chapter.
Adjusting throttle control cable → Chapter.
   

Removing and installing fuel tank with attached parts and fuel filter > < Checking the coolant system for tightness