Parts of the Cooling System |
Note t
| When the engine is warm the cooling system is under pressure. Reduce pressure before repairs. |
t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
t
| Use pliers for spring strap clips to fit the spring strap clips. |
t
| Always replace seals and gasket rings. |
t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose). |
t
| Checking the coolant system for tightness. |
–
| after replacing fill entire system with fresh coolant |
3 - | Coolant pump, coolant regulator |
–
| Removing and installing coolant pump → Chapter |
–
| Removing and installing coolant regulator → Chapter |
7 - | Heating for throttle valve supports |
–
| only for vehicles with automatic gearbox |
|
|
|