skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing cylinder head > < Inspecting the cylinder head for distortion

Octavia Mk1

Reworking a cylinder head
Reworking a cylinder head
Procedure
   
–  Reworking of the cylinder head (face-grinding) is only permissible up to minimum dimension -a-.
t  Minimum dimension a: 132.6 mm
  Note
If the sealing surface is reworked, the valves should be set lower by the same amount (rework valve seat rings) otherwise the valves will strike the pistons. Ensure that the maximum permissible dimensions are maintained → Fig..
  A15-0148

Installing cylinder head > < Inspecting the cylinder head for distortion