Octavia Mk1
|
| A - | Lambda probe -G39- with heating for lambda probe -Z19- |
| q | immediately upstream of the catalytic converter |
| B - | 4-pin connector |
| q | for lambda probe and heating for lambda probe |
| q | on the underside of the vehicle on right in direction of travel below a plastic cap |
| 1 - | 3-pin connector |
| q | for hall sender - G40- |
| q | black |
| 2 - | Hall sender -G40- |
| q | below the camshaft wheel |
| 3 - | Valve for variable intake manifold changeover -N156- |
| 4 - | Intake air temperature sender -G42- |
| 5 - | Throttle valve control unit -J338- |
| 6 - | Control unit for Simos -J361- |
| 7 - | Coolant temperature sender -G62- |
| 8 - | Air mass meter -G70- |
| 9 - | 3-pin connector |
| q | for knock sensor 1 -G61- |
| 10 - | Ignition coils -N- and -N128- with power output stage -N122- |
| 11 - | Engine speed sender -G28- |
| 12 - | 3-pin connector |
| q | for engine speed sender |
| q | grey |
| 13 - | Knock sensor 1 -G61- |
| 14 - | Injection valves - N30- to -N33- |
| 15 - | Fuel pressure regulator |
| 16 - | Activated charcoal filter system solenoid valve 1 -N80- |
