–
| Attach supporting device -MP 9-201- to the engine as follows and lift out of engine/gearbox lifting device (e.g. -V.A.G 1383 A-) with workshop crane (e.g. -V.A.G 1202 A-). |
t
| On the belt pulley side: 3rd hole of the perforated bar in position 2 |
t
| On the flywheel side: 4th hole of the perforated bar in position 8 |
Caution Use securing pins on the hooks and rig pins. |
|
Note t
| The rig positions on the supporting bracket marked 1...4 point towards the belt pulley. |
t
| The holes in the perforated bars are counted from the hook. |
|
|
|