Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.6 ltr./75 kW Engine - Mechanical Components | Engine assy,cylinder block,crankcase | Removing and installing engine - Part 1 | Removing engine

Vehicles with automatic gearbox

–	Use screwdriver to press off selector lever cable -1- at gearbox selector lever -4-, pull off securing clasp -3- at support bearing.

–	Take off selector lever cable and place to the side.

–	Unbolt bracket for pressure line of power-assisted steering at gearbox support.

–	Disconnect plug:

1 -	to the solenoid valves

2 -	to the vehicle speed sensor -G68-

3 -	at the multifunction switch -F125-

4 -	at the gearbox speed sensor -G38-

–	Unplug the connector from the speedometer sender -G22-.

–	Detach wiring loom for the fixtures and run out to the side.

Skoda Workshop Service and Repair Manuals