Octavia Mk1
Exhaust manifold, exhaust pipe with catalytic converter and attached parts |
Note
Always replace gaskets and self-locking nuts. |
1 - | Gasket |
q | replace |
2 - | Shield |
q | for engines with engine code AVU |
3 - | 25 Nm |
q | for engines with engine code AVU |
4 - | Support |
5 - | Washer |
q | if collar nut fitted, then not present |
6 - | 25 Nm |
q | replace |
q | coat with hot screw paste - G 052 112 A3- before inserting |
7 - | 6-pin plug connection |
q | black for lambda probe 1 upstream of catalytic converter - G39- and lambda probe heater -Z19- |
q | on underside of vehicle on right |
8 - | From combination valve |
q | for engines with engine code AVU |
q | the secondary air system → Chapter 26-2 |
9 - | Bolted connection, 35 Nm |
q | for engines with engine code AVU |
10 - | Connecting tube |
q | for engines with engine code AVU |
q | the secondary air system → Chapter 26-2 |
11 - | Lambda probe 1 downstream of catalytic converter -G39-, 50 Nm |
q | only coat the thread with hot screw paste - G 052 112 A3-; hot screw paste must not get into the slot of the probe body |
q | test → 1.6 l/75 kW Engine, Fuel Injection and Ignition System; Rep. Gr.24 |
12 - | Exhaust manifold |
q | for engines with engine code AVU |
q | removing and installing → Chapter |
13 - | Shield |
q | for engines with engine code BFQ |
14 - | 25 Nm |
q | for engines with engine code BFQ |
15 - | 10 Nm |
16 - | To throttle valve control unit -J338- |
17 - | 25 Nm |
18 - | 4 Nm |
19 - | Retaining clip |
q | for attaching cable of lambda probe upstream of catalytic converter |
20 - | Flange |
q | for attaching connection pipe at EGR valve |
21 - | 25 Nm |
q | replace |
22 - | 4-pin plug connection |
q | brown for lambda probe 2 downstream of catalytic converter -G130- and lambda probe heater -Z29- |
q | on underside of vehicle on right |
23 - | Lambda probe 2 after catalytic converter -G130-, 50 Nm |
q | only coat the thread with hot screw paste - G 052 112 A3-; hot screw paste must not get into the slot of the probe body |
q | test → 1.6 l/75 kW Engine, Fuel Injection and Ignition System; Rep. Gr.24 |
24 - | To front silencer |
25 - | 60 Nm |
26 - | Front exhaust pipe with catalytic converter |
27 - | 40 Nm |
q | replace |
q | coat with hot screw paste - G 052 112 A3- before inserting |
28 - | Gasket |
q | replace |
29 - | Exhaust manifold |
q | for engines with engine code BFQ |
q | removing and installing → Chapter |
30 - | Connecting tube |
q | Exhaust gas recirculation system → Chapter 26-3 |
31 - | Support |
q | for engines with engine code AVU |
32 - | 20 Nm |
q | for engines with engine code AVU |
q | replace |