Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Drive unit | 1.8 ltr./110 kW Engine - Mechanical Components | Engine cooling | Removing and installing parts of the cooling system

Installing coolant pipe

Special tools and workshop equipment required

t	Torque wrench 5...50 Nm (e.g. - V.A.G 1331 -)

t	Pliers for spring strap clips

Note

Always replace gasket rings and seals.

–	Moisten O-ring -1- with coolant and slide onto coolant pipe -2-.

–	Push the coolant pipe into the bore hole on the cylinder block.

–	Tighten bracket for coolant pipe to 10 Nm.

Skoda Workshop Service and Repair Manuals