Octavia Mk1
| Part I |
Note| Always replace seals and gaskets. |
| 1 - | 40 Nm |
| q | replace |
| q | coat with hot bolt paste -G 052 112 A3- |
| 2 - | Gasket |
| q | replace |
| 3 - | Exhaust turbocharger |
| q | with charge pressure control valve pressure unit |
| q | Removing and installing completely |
| 4 - | O-ring |
| q | replace |
| 5 - | 10 Nm |
| 6 - | Inlet connection |
| 7 - | Gasket |
| q | replace |
| q | Check fitting position |
| 8 - | 20 Nm |
| 9 - | Shield |
| 10 - | Bracket at top |
| q | for air guide pipe at top |
| 11 - | Hollow screw, 30 Nm |
| 12 - | Oil feed line |
| q | from oil filter bracket |
| 13 - | 30 Nm |
| q | replace |
| q | Coat thread and bolt head contact surface with -G 052 112 A3 - hot bolt paste |
| 14 - | Exhaust manifold |
| 15 - | Gasket |
| q | replace |
| q | Check fitting position |
| 16 - | 25 Nm |
| q | replace |
| q | coat with hot bolt paste -G 052 112 A3 - |
| 17 - | Hollow screw, 35 Nm |
| 18 - | Coolant return-flow line |
| 19 - | 25 Nm |
| 20 - | Spacer sleeve |
| 21 - | Coolant feed line |
| 22 - | 30 Nm |
| q | use only original bolt |
| 23 - | Support |
| q | For exhaust turbocharger |
| 24 - | Gasket |
| q | replace |
| 25 - | Gasket |
| q | replace |
| 26 - | Oil return line |
| q | to oil pan |
