| Testing databus (CAN bus) |
| –
| Use the relevant current flow diagrams to determine which control units have been connected to the data bus drive (CAN bus, Controller Area Network) |
| –
| Check tight fit of the plug connections of all connected control units. |
| –
| Connect vehicle system tester -V.A.G 1552- and select function 00 “Automatic test sequence”. |
| Before testing the communication cable check whether there are no functional faults in the connected control units. |
| Special tools and workshop equipment required |
| t
| Test box -V.A.G 1598/31- |
| t
| Handheld multimeter, e.g. -V.A.G 1526 A- |
| t
| Adapter cable set, e.g. -V.A.G 1594 A- |
|
|
|
