skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Display group 006 - Basic functions > < Test table - Display group 004
Display group 005, Basic functions:
   
Display group 005, Basic functions:
l  Engine idling
l  Driving
 
Reading measured value block 5⇐ Readout on display  
xxxx rpmxxx %x km/hText   
1234⇐ Display fieldsSpecificationAnalysis
    Operating state (idling, part load, full load, enrichment, overrun)------
   Driving speed0...230 km/h---
  Engine load10...150%---
 Engine speed700...6800 rpm → Chapter

  Note
t  regarding display field 3
t  The source of the speed signal is speedometer sender -G22-. The signal is further regulated in the dash panel insert.
t  The processed signal passes to the contact of the engine control unit and is used for idling speed stabilisation and for damping load change jolts during gearshifts.
   

Display group 006 - Basic functions > < Test table - Display group 004