Note Motronic control unit -J220-* with connector → Chapter. |
1 - | Ignition coils -N- and - N128- |
–
| with identification for ignition leads: |
–
| with power output stages (-N122 - and - N192-) |
–
| with shielded plug and spark-plug |
4 - | Camshaft adjustment valve 1 -N205-*/** |
–
| removing and installing with special spark plug wrench |
8 - | Knock sensor 2 -G66-* |
–
| In direction of travel on the left |
–
| contacts of sensor and of connector gold-plated |
–
| The tightening torque influences the knock sensor function |
10 - | Knock sensor 1 -G61-* |
–
| In direction of travel right |
–
| contacts of sensor and of connector gold-plated |
17 - | Trim for hall sender |
–
| can be installed only in one position |
–
| check fitting position: Insert the notch in the camshaft. |
|
|
|