| Parts of the Cooling System |
Note | t
| When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs. |
| t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
| t
| Use pliers for spring strap clips to remove and fit the spring strap clips. |
| t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose). |
| Check the coolant system for tightness → Chapter. |
Note | Always replace seals and gasket rings. |
|
|
|
