| Removing and installing cylinder head |
Note | t
| Always replace cylinder head bolts. |
| t
| Always replace self-locking nuts. |
| t
| When installing an exchange cylinder head with the camshaft installed, it is necessary to oil the contact surfaces between bucket tappets and the cam track after installing the head. |
| t
| Do not remove the plastic bases supplied as a protection for the open valves until just before fitting on the cylinder head. |
| t
| If the cylinder head is replaced, the system must be completely filled with fresh coolant. |
| t
| Always replace the seals and gaskets during assembly work. |
| Removing and installing, tightening the timing belt → Chapter. |
|
|
|
