Octavia Mk1
| Parts of the cooling system fitted to body |
| 1 - | Radiator |
| q | after replacing fill entire system with fresh coolant |
| q | removing and installing → Chapter |
| 2 - | O-ring |
| q | replace |
| 3 - | Top coolant hose |
| q | secured using a retaining clip |
| q | connection diagram for coolant hoses → Chapter |
| 4 - | Fan shroud |
| 5 - | 10 Nm |
| 6 - | Auxiliary fan |
| q | for vehicles with air conditioning system or additional equipment |
| 7 - | Fan holder |
| 8 - | Retaining clip |
| q | for fan cable |
| q | check tightness |
| 9 - | Connector |
| 10 - | Radiator fan |
| 11 - | to coolant pipe |
| q | connection diagram for coolant hoses → Chapter |
| 12 - | Expansion reservoir |
| q | Check the cooling system for tightness → Chapter |
| 13 - | Screw cap |
| q | Test pressure 0.14...0.16 MPa (1.4...1.6 bar) |
| q | check → Chapter |
| 14 - | Support |
| q | for plug of fan |
| 15 - | Bottom coolant hose |
| q | attached to radiator with retaining clip |
| q | connection diagram for coolant hoses → Chapter |
| 16 - | O-ring |
| q | replace |
| 17 - | Thermoswitch -F18-, 35 Nm |
| q | for radiator fan |
| q | switching temperatures: |
| 1. Stage |
| on: 92...97 °C |
| off: 84...91 °C |
| 2. Stage |
| on: 99...105 °C |
| off: 91...98 °C |
| 18 - | Support |
| q | for radiator |
| q | Check fitting position |
| q | pay attention to different version |
| 19 - | 10 Nm |
