Octavia Mk1
| Removing and installing exhaust turbocharger for engine AGR with attached parts |
| 1 - | Intake manifold |
| q | on engines ► 07.97 |
| q | with mechanical exhaust gas recirculation valve |
| 2 - | Intake manifold |
| q | on engines 08.97 ► |
| 3 - | O-ring |
| q | on engines 08.97 ► |
| q | replace |
| 4 - | Vacuum setting element |
| q | on engines 08.97 ► |
| q | for intake manifold flap |
| 5 - | Induction pipe |
| q | on engines 08.97 ► |
| q | with mechanical exhaust gas recirculation valve |
| q | with an intake manifold flap |
| 6 - | 10 Nm |
| 7 - | from charge-air cooler |
| 8 - | Gasket |
| q | Fitting position: Bead points to intake manifold |
| q | replace |
| 9 - | Gasket |
| q | replace |
| 10 - | 20 Nm |
| 11 - | Exhaust return pipe |
| 12 - | Gasket |
| q | Check fitting position |
| 13 - | Exhaust manifold |
| 14 - | Support |
| 15 - | Shield |
| 16 - | Washer |
| q | 1.6 mm thick |
| 17 - | 25 Nm |
| 18 - | Sealing ring |
| q | replace |
| 19 - | Connecting piece |
| q | for charge pressure control |
| 20 - | Hollow screw, 15 Nm |
| 21 - | Screwed socket, 40 Nm |
| 22 - | Oil return-flow line |
| q | for vehicles 05.99 ► |
| q | to cylinder block |
| 23 - | from air filter |
| 24 - | Sealing ring |
| q | replace |
| 25 - | Oil return-flow line |
| q | for vehicles ► 04.99 |
| q | to cylinder block |
| 26 - | Hollow screw, 40 Nm |
| 27 - | 15 Nm |
| 28 - | Front exhaust pipe |
| 29 - | Exhaust gas turbocharger |
| q | removing and installing → Chapter |
| 30 - | Screwed socket |
| q | 30 Nm for vehicles ► 02.99 |
| q | 20 Nm for vehicles 03.99 ► |
| 31 - | Oil feed line |
| q | from oil filter bracket → Chapter |
| 32 - | 30 Nm |
| q | replace |
| q | Coat thread and bolt head contact surface with hot bolt paste -G 052 112 A3- |
| 33 - | Changeover valve for intake manifold flap -N239- |
| 34 - | Washer |
| q | 4 mm thick |
| 35 - | 25 Nm |
| q | replace |
| q | Coat thread and contact surface with hot bolt paste -G 052 112 A3- |
