Octavia Mk1
Overview of fitting locations |
Components A to F are not shown on the overview figure. |
A - | Diesel direct injection system relay - J322- |
q | on relay carrier → Current flow diagrams and Fitting locations |
B - | Glow plug relay -J52- |
q | on relay carrier → Current flow diagrams and Fitting locations |
C - | Fuel pump relay -J17- |
q | on relay carrier → Current flow diagrams and Fitting locations |
D - | Accelerator pedal position sender -G79- |
q | in footwell on the accelerator pedal → Fig. |
E - | Brake light switch -F- and Brake pedal switch -F47- |
q | in footwell on the brake pedal → Fig. |
F - | Clutch pedal switch -F36- |
q | in footwell on the clutch pedal → Fig. |
1 - | Mechanical exhaust gas recirculation valve |
q | with intake manifold flap on engines with identification characters ATD |
q | with intake manifold flap motor -V157- on engines with identification characters AXR |
2 - | Solenoid valve |
q | Change-over valve for intake manifold flap -N239- on engines with identification characters ATD |
q | Exhaust gas recirculation valve 2 -N213- on engines with identification characters AXR |
3 - | Exhaust gas recirculation valve -N18- |
4 - | Engine control unit -J248- |
5 - | Solenoid valve for charge pressure control -N75- |
6 - | Low heat output relay -J359- |
7 - | High heat output relay -J360- |
8 - | Air mass meter -G70- |
9 - | Sender for the coolant temperature -G62- |
10 - | Fuel temperature sender -G81- |
11 - | Connector |
q | grey for engine speed sender -G28 - |
q | black for camshaft position sensor - G40- |
12 - | Engine speed sender -G28- |
13 - | Vacuum reservoir |
14 - | Camshaft position sensor -G40- |
15 - | Intake manifold pressure sender -G71- with intake manifold temperature sender - G72- |
|