Observe the following points to prevent injury to persons or damage to the injection and ignition system: |
t
| Only disconnect and connect wires of the injection and ignition system - and high-voltage and measuring device wires - when the ignition is switched off. |
t
| Enter the code of the radio set before disconnecting the battery. |
t
| Always switch off the ignition before disconnecting and re-connecting the battery. Otherwise the engine control unit may be damaged. |
Note If test and measuring devices are required during test drives observe the following: |
t
| Always secure the test and measuring devices on the rear seat and have a second person operate them there. If the test and measuring equipment is operated from the front passenger seat, this can result in injuries to the persons sitting on that seat in the event of an accident which involves the front passenger airbag being deployed. |
|
|
|