skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Testing auxiliary signals > < Test condition

Octavia Mk1

Procedure
Procedure
–  Connect vehicle system tester -V.A.G 1552-. Switch ignition on and select address word 01 “Engine electronics” → Chapter.
   
Readout on display, e.g.:
If “G000SG” is displayed, the cruise control system is active
  
038906019R  1.9l R4  EDC G000SG  1053 ->
Coding 00003                   WSC XXXXX
Readout on display:
If “000SG” is displayed, the cruise control system is not active
–  Press →.
–  Select function 11 “login procedure”.
  
038906019R  1.9l R4  EDC  000SG  1053 ->
Coding 00003                   WSC XXXXX
Readout on display:
–  Enter code number as stated in the table.
  
Login procedure
Enter code number  XXXXX
Code numberCruise control system (CCS) 
11463Activate the cruise control system 
16167Deactivate the cruise control system

–  Confirm with Q.
–  Select function 06 “End output” and confirm with Q.
After the CCS is activated, conduct a test drive as an operational check.
   

Testing auxiliary signals > < Test condition