skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Analysis: Display group 008, display field 3 - Injection rate limit over engine speed (torque limit) > < Display group 008 under full load (test drive in 2nd gear coolant temperature not below 75°C)
Analysis: Display group 008, display field 2 - Injection rate (driver's instruction)
   
Analysis: Display group 008, display field 2 - Injection rate (driver's instruction)
Display -V.A.G 1552-Possible cause of faultRectifying fault 
below 42.0 mg/s
t  Accelerator pedal was not fully pressed down
–  repeat test at full throttle
 
 
t  Accelerator pedal position sender -G79- defective
–  Testing accelerator pedal position sender -G79- → Chapter

   

Analysis: Display group 008, display field 3 - Injection rate limit over engine speed (torque limit) > < Display group 008 under full load (test drive in 2nd gear coolant temperature not below 75°C)